Proudly designed and manufactured in the UK since 1999.

Delivering comfort in the most challenging environments.

Chillcheater  |  SKU: KE22KIT6bk

KEEL EAZY KEEL PROTECTION KIT 50MM WIDE, 6M LONG

£59.00 GBP
Tax included Shipping calculated at checkout.

Colour: Black

Product Description

Product details

Everything you need to protect the keel of your boat in a pre-packed kit:

Please note that if your kayak is left with the Keel Eazy exposed in extreme sunlight, you may experience slippage and movement of the Keel Eazy due to the glue softening. Best to store your boat in a way that doesn't expose the Keel to direct sunlight.

  • 6m lenth 50mm wide (2") KeelEazy self-adhesive keel protection strip
  • KeelEazy surface preparation wipes
  • Full installation instructions & links to our YouTube Eazy-install videos

KeelEazy protects the vulnerable areas of boats simply, effectively & inexpensively. This peel and stick material is lighter and more abrasion resistant than traditional fiberglass tape with gel coat. It can be applied to any composite or Thermoformed  kayak, Jet Ski, dingy, etc... and takes just minutes to install. Can be removed with a heat gun.

Available in 7 colours: Black, White, Red, Yellow, Green, Blue & Orange

See a demonstration here.

Versatile, quick & inexpensive
The solution to avoiding scrapes, scuffs & dings; it sticks to almost any material (we haven’t found anything it won’t stick to yet!)

Self-adhesive PVC strip
Providing an extremely durable surface anywhere that abrasion is a concern

Ideally suited to the keel of a kayak

It is also used on boats, canoes, jet skis, car doors etc....

Easily applied

To fibreglass, Polyethylene, thermoformed ABS, skin on frame, Roylex and metal surfaces and can be moulded over compound curves with the use of a heat gun.

Ideal for rental fleets, schools & training centres
Giving an extended season on the boats and an increased return on investment.

Can be applied full length or on specific wear spots

And removed by applying heat from a heat gun and peeling it away, surplus adhesive can be removed with Cellulose thinners or Tolulene. Please be aware that certain chemicals may affect the surface of your kayak.



Care information

After Care

Aquatherm® and Aquatherm Fleece®

Recommend hand washing with warm soapy water.

Turn garment inside out. Short, warm, delicate wash, max 40 degrees in mild soapy water. Rinse thoroughly and air dry. Do not spin. Do not wring.

Hang garments from their cuffs and neck to ensure that if there should be any water left then it can drain away easily.

Store clean and dry indoors away from heat and direct sunlight

Do not tumble dry. Do not iron. Do not bleach. Do not dry over hot radiators or near excessive heat


Care information

How do I wash and care for my Aquatherm® and Aquatherm Fleece® garments?

For Aquatherm®, Super-stretch Aquatherm® and Aquatherm Fleece®:

  • Turn the garment inside out.
  • Use a short, warm, delicate wash with a maximum temp 40 degrees C° in mild soapy water .
  • Rinse thoroughly and air dry.
  • Do not spin.
  • Do not wring.
  • Do not tumble dry.
  • Do not iron.
  • Do not bleach.
  • Do not dry over hot radiators or near excessive heat.
  • Hang garments from their cuffs and neck to ensure that if there should be any water ingress in the double fabric seals then it can drain easily.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
P L.E. (Holyhead, GB)
Good piece of kit.

This one was easier to fit as it's the second one I have done.
The key is to make sure you have prepared the area where it's going to fit.
This time I used a proper electric paint stripper (didn't have one last time I used a hair dryer), it went on much easier!!

G
Glenn (London, GB)
Keel easy strip

Good product easy to apply as long as you apply sufficient heat and some stretch when going round tight angles
Quick delivery and good service from reedchillcheater. As normal

M
Mark G.
Great bit of kit.

I fitted keeleazy to my last kayak and after 7 years of hard use it has worn very well. As last time I found fitting it to my new boat reasonably straightforward - I have a well defined keel except for the centre and with some care and attention I'm pretty satisfied with the result.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Chillcheater

KEEL EAZY KEEL PROTECTION KIT 50MM WIDE, 6M LONG

£59.00 GBP

Product details

Everything you need to protect the keel of your boat in a pre-packed kit:

Please note that if your kayak is left with the Keel Eazy exposed in extreme sunlight, you may experience slippage and movement of the Keel Eazy due to the glue softening. Best to store your boat in a way that doesn't expose the Keel to direct sunlight.

KeelEazy protects the vulnerable areas of boats simply, effectively & inexpensively. This peel and stick material is lighter and more abrasion resistant than traditional fiberglass tape with gel coat. It can be applied to any composite or Thermoformed  kayak, Jet Ski, dingy, etc... and takes just minutes to install. Can be removed with a heat gun.

Available in 7 colours: Black, White, Red, Yellow, Green, Blue & Orange

See a demonstration here.

Versatile, quick & inexpensive
The solution to avoiding scrapes, scuffs & dings; it sticks to almost any material (we haven’t found anything it won’t stick to yet!)

Self-adhesive PVC strip
Providing an extremely durable surface anywhere that abrasion is a concern

Ideally suited to the keel of a kayak

It is also used on boats, canoes, jet skis, car doors etc....

Easily applied

To fibreglass, Polyethylene, thermoformed ABS, skin on frame, Roylex and metal surfaces and can be moulded over compound curves with the use of a heat gun.

Ideal for rental fleets, schools & training centres
Giving an extended season on the boats and an increased return on investment.

Can be applied full length or on specific wear spots

And removed by applying heat from a heat gun and peeling it away, surplus adhesive can be removed with Cellulose thinners or Tolulene. Please be aware that certain chemicals may affect the surface of your kayak.



Colour

View product